Spiral sand washing machine
Product Description
Spiral sand washing machine is divided into two types: single spiral sand washing machine and double spiral sand washing machine. It is mainly used for washing, grading, cleaning, and fine-grained and coarse-grained material washing in highway, hydropower, construction and other industries. . It has low power consumption and high cleanliness. The sealing structure is good, the fully enclosed transmission device and the adjustable jaw plate ensure the equipment is efficient, durable, clean, dewatering effect, and the fine-grained product remains stable.
Introduction
The spiral sand washing machine is a kind of sand washing machine. The sand material is mainly stirred by the screw device in the equipment, so that the soil in the sand stone material is mixed with water, and is discharged from the flow port on the equipment, and the sand stone material is in the Under the action of the screw device, it is gradually screened and discharged from the discharge port at the top, thereby achieving the cleaning and screening effect of the sand and gravel material.
The spiral sand washing machine is suitable for washing, grading and impurity removal in metallurgy, building materials, hydropower and other industries, and is used for washing of fine-grained and coarse-grained materials. It is suitable for sand for construction and gravel for road construction. The spiral sand washing machine has low power consumption and high washing degree. The sealing structure is good, the fully enclosed transmission device and the adjustable jaw plate ensure the high efficiency, durability, good cleaning and dewatering effect, and the stability of the fine grain products.
Scope of application
Spiral sand washing machine is especially suitable for making abrasive, refractory materials, cement, quartz sand, steel sand, slag powder, copper ore, iron ore, gold ore, concrete aggregate, asphalt aggregate and other hard and brittle materials. Fine and medium crushed, it is an efficient and energy-saving gravel sand making equipment, which is 50% more energy efficient than traditional sand making machines.
Detailed Photos
Product Parameters
Applicable material
It is suitable for the washing operation of medium-fine-grained and coarse-grained materials. It is used for washing, grading, impurity removal, and fine-grained and coarse-grained material washing in highway, hydropower, construction and other industries.
Application field
Suitable for washing, grading, impurity removal, etc. in metallurgy, building materials, hydropower and other industries
The spiral sand washing machine has reasonable structure, convenient maintenance, large processing capacity, small power consumption and high washing degree. The novel sealing structure, fully enclosed oil bath transmission and adjustable overflow slab ensure the high efficiency, durability, cleaning and dewatering effect of the series, and the stability of the fine grain products.
Parameter
| Model |
LSX600 |
LSX760 |
LSX920 |
2LSX920 |
LSX1120 |
2LSX1120 |
| Number of axes |
1 |
1 |
1 |
2 |
1 |
2 |
| Spiral diameter |
mm |
600 |
760 |
920 |
920 |
1120 |
1120 |
| Sink length |
mm |
7200 |
7600 |
7600 |
7600 |
9750 |
9750 |
| Feed granularity |
mm |
≤10 |
≤10 |
≤10 |
≤10 |
≤10 |
≤10 |
| Processing capacity |
t/h |
40-50 |
50-75 |
100 |
200 |
175 |
360 |
| Shaft speed |
r/min |
32 |
26 |
21 |
21 |
17 |
17 |
| Power |
kw |
7.5 |
11 |
11 |
2*11 |
18.5 |
2*18.5 |
| Weight |
t |
3 |
5 |
6 |
11 |
10 |
18 |
The spiral sand washing machine has a reasonable structure, convenient maintenance, large processing capacity, small power consumption and high washing degree. The novel sealing structure of the spiral stone washing machine, the fully-blocking oil bath type transmission device and the adjustable overflow weir plate ensure that the series products are efficient, durable, clean and dehydrated, and the fine-grained products remain uncluttered.
Use maintenance
The vibrating screen should be started without any material on the screen surface. Try to avoid the material from being turned on, and the sieve machine can be fed after it is running smoothly. The feed should be stopped before stopping, and the material should be stopped after the material is removed. During the working process, the operation of the screening machine should be observed frequently. If the movement is abnormal or abnormal, it should be stopped and checked in time to find out the cause and eliminate the malfunction.
Sand washing machine installation
Installation adjustment and operation of the machine The machine is assembled by the manufacturer and supplied after being tested by the empty car. The user should check it carefully after receiving the goods. In order to discover and eliminate problems that may arise during transportation, the machine should be installed,
Adjusted and operated:
1. Due to the large twist of the machine, it is recommended to install the machine on the concrete foundation. The pre-embedded weldment is installed on the foundation for welding during installation. The foundation depth and area are calculated separately according to the soil condition. The recommended base weight is roughly the weight of the machine. 3 times, the machine installation dimensions refer to the base map.
2. After the installation is in place, check whether the gear of the reducer is displaced, whether the gap between the water tank and the large wheel bucket is the same. After the adjustment, fix the machine to the foundation.
3, should add lubricant, adjust the oil level, generally take 50% below the shaft center is appropriate.
4. After the machine is installed and adjusted, the test run should be carried out. The no-load test should reach:
1) Continuous operation for 2 hours:
2) All solid parts should be firm and free of looseness;
3) There is no abnormal sound in the reducer and gear box.
5. In addition to the no-load test requirements, the load test should also meet the following requirements:
1) When feeding, the material should not be strongly impacted on the water tank. Do not load or fill the water tank with partial load to avoid damage to the bucket and the body.
2) The maximum mass of the feed is in accordance with the design regulations.
Structural features
1. Simple structure and stable operation.
2. The bearings are separated from the water and materials to avoid premature damage caused by pollution and rust.
3. Suitable for a variety of work environments.
4. The material to be washed has less loss and the cleaning efficiency is high, which can fully meet the requirements of high-grade materials.
5, the service life is relatively long, almost no wearing parts.
6, in rare cases need to be repaired, so it can greatly reduce costs.
Selection range
The sand washing machine is divided into two types from the point of view of use. One is the sand washing system. This is a sand washing machine in a broad sense, and the scope of application is relatively wide. The other is the commonly used sand making machine. The sand washing machine has limitations in actual use. In general, the sand washing machine is not only used in the sand making machine, but also widely used in the cleaning of dirt, stones and other impurities contained in river sand, ground sand, weathered sand, etc. The sand that comes out is called "washed sand". Widely used in sand yards, mixing stations and various key projects.
Contrast difference
The spiral stone washing machine is used for desilting and screening operations of sand and gravel in construction sites, sand and gravel plants, prefabricated plants and hydroelectric fields. It can also be used for ore sorting operations. It can effectively process materials within 0-30mm, and can wash the soil and ash powder on the material into clean materials. The machine has the advantages of simple structure, easy maintenance and high washing efficiency. The spiral sand washer is divided into a double helix and a single helix. Compared with the single-screw sand washing machine, the double-screw washing machine has the characteristics of high efficiency and large output, and can process materials within 0-30mm.
The double-spiral washing machine has the characteristics of simple structure, easy maintenance and high washing efficiency.
The double-spiral stone washer machine rotor adopts a central structure, the spiral blade is mounted on the central shaft, and a reducer is connected to the central shaft for work. An ore cleaning device for mechanical extension by means of the principle that the specific gravity of the solid particles is different and thus the sedimentation speed in the liquid is different.
Company Profile
){kind=link}
){kind=link}